Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cat 4500 private vlan and etherchannel

Starting with version 15.0(2)SG, the 4500 catalyst is able to do private vlans over etherchannel.  The configuration guide for that gives an example of how to configure the etherchannel interface, but has no reference to how to configure the individual interfaces in the channel.

For instance I want to configure port-channel 15 as a promiscuous port and have ports g1/47 & 48 in the channel.  Here is the config for the pvlans and port-channel:

vlan 800

  private-vlan primary

  private-vlan association 850

vlan 850

  private-vlan community

int p15

  switchport mode private-vlan promiscuous

  switchport private-vlan mapping 800 850

Now I want to add g1/47 & g1/48 as interfaces in the port-channel.

int g1/47

  switchport

  channel-group 15 mode xxxx

Do I leave that as is, or do I add pvlan mode and mapping statements like that of int p15?

1 REPLY
New Member

Re: Cat 4500 private vlan and etherchannel

Hi

U n can only have 1-5 port channels, u create you vlan and assign its interface
Then you creat you port channel and add the vlan to it

Global config, int port channel 5
Switchport access vlan 3


The int are already int the vlan from earlier

Sent from Cisco Technical Support iPad App

133
Views
0
Helpful
1
Replies
CreatePlease to create content