Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat 65 Sup2 NVRAM corrupted

Hi there:

I have several pieces of Sup2 engines, recently i want to use them for testing purpose, and i found this message every time i power cycle the switch.

----------------------------

Warning: Rommon NVRAM area is corrupted. Initialize the area to default values

------------------------------

I change the register to 0x2102, but once i power down them for some days, this message comes up again. ( CLI reboot the switch is ok)

I am thinking that the NVRAM need to use the battery (cr-2430) on board, if the battery ran out, then the nvram can not store the data.

Am i correct?

3 REPLIES
Hall of Fame Super Silver

Re: Cat 65 Sup2 NVRAM corrupted

Hello Jason,

your understanding is correct

Hope to help

Giuseppe

New Member

Re: Cat 65 Sup2 NVRAM corrupted

If i am correct, any one knows how to replace the cr-2430 battery, it's not easy, because the battery is welded on the main board, only can take it out by force....

Bronze

Re: Cat 65 Sup2 NVRAM corrupted

I believe that your only option is through RMA. Contact Cisco TAC for that.

HTH

624
Views
0
Helpful
3
Replies
CreatePlease to create content