Cat 6500 - To erase configs on Switch and the MSFC
Hello and greetings.
I have an older Cat 6500 switch with an MSFC. I am required to erase all configs on the switch. I would like to know if there's any sequence of actions I need to follow. For, I have run the command 'clear config all' on the switch. Now, I am not able to access and erase the configs on the MSFC. I have to clear the configs on MSFC. So, given the scenario, how can I best erase the configs on the MSFC? I attempted 'session 15' and other session commands -but not able to erase. (err msg: module not found)
Any help . suggestions / links will be much apreciated!
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...