Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

cat 6506-e with WS-X6k-sup2-2GE

Hi All,

I have just installed the catalyst with a secondary supervisor engine. I log into the secondary to see the following error message.

Error-2-Console> sh mod

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

2 2 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes error

Mod Module-Name Serial-Num

--- -------------------- -----------

2 SAD05060677

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

2 00-01-c9-da-0f-f6 to 00-01-c9-da-0f-f7 2.17 7.1(1) 8.6(1)

00-01-c9-da-0f-f4 to 00-01-c9-da-0f-f5

00-01-c9-da-0f-f6 to 00-01-c9-da-0f-f7

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw Sub-Sw

---- ----------------------- ------------------- ----------- ------ ------

2 L3 Switching Engine II WS-F6K-PFC2 SAD050601U1 1.6

Error-2-Console> sh ver

Software, Version NmpSW: 8.6(1)

Copyright (c) 1995-2007 by

NMP S/W compiled on Feb 14 2007, 17:33:18

System Bootstrap Version: 7.1(1)

System Boot Image File is 'bootflash:RTSYNC_RTSYNC_cat6000-sup2k8.8-6-1.bin'

System Configuration register is 0x2102

Hardware Version: 0.0 Model: Serial #:

Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

2 2 WS-X6K-SUP2-2GE SAD05060677 Hw : 2.17

Fw : 7.1(1)

Fw1: 6.1(3)

Sw : 8.6(1)

Sw1: 8.6(1)

WS-F6K-PFC2 SAD050601U1 Hw : 1.6

Sw :

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

Uptime is 0 day, 0 hour, 3 minutes

Error-2-Console>

what could possily wrong. Initially after inserting all went well with the images getting synchronized but when i did a supervisor switch it crashed. there are absolutely no machines connected.

Thanks in advance,

subra

1 REPLY
New Member

Re: cat 6506-e with WS-X6k-sup2-2GE

Help

194
Views
0
Helpful
1
Replies
CreatePlease to create content