Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cat 6509- VSS - Minor Error (Sup module)

Hi Guys,

We have a VSS environment with two Cisco 6509-Es.

IOS image:s72033-ipservicesk9_wan-mz.122-33.SXI5

when I switch on or reload the  Core switches(VSS), I find a Minor Error in the "Show module switch all" command.

I also did a "show diagnostic result switch 1 module 5"

Switch 1 Module 5: Supervisor Engine 720 10GE (Active)  SerialNo : SAL1521E035

  Overall Diagnostic Result for Switch 1 Module 5 : MINOR ERROR

  Diagnostic level at card bootup: complete

  Test results: (. = Pass, F = Fail, U = Untested)

   45) TestVslLocalLoopback:

      Port  1  2  3  4  5

      -------------------

            U  U  U  .  F

This issue temporarily relieves when reseating the X2 module, but reappears after reloading the switch.

Any comments/Suggestions are highly appreciated.

Thanks,

Siby.

5 REPLIES
Hall of Fame Super Gold

Cat 6509- VSS - Minor Error (Sup module)

RMA the module.  If it's re-occurs then rest assured, something sinister is happening.

Community Member

Cat 6509- VSS - Minor Error (Sup module)

Many thanks for the reply..

When I reload some times the Minor error appears and sometimes not.

Still do you think this could be a Hardware issue?

VIP Super Bronze

Cat 6509- VSS - Minor Error (Sup module)

Hi,

If the issue disappears when you reseat the X2 module, then replace the X2 module first. I am assuming you are referring to the X2 modules on the Sup right?

HTH

Community Member

Cat 6509- VSS - Minor Error (Sup module)

Hi Reza,

Thanks for the reply,

Let me re-create the problem and confirm this.

Hall of Fame Super Gold

Cat 6509- VSS - Minor Error (Sup module)

Still do you think this could be a Hardware issue?

Yes I do.

1572
Views
4
Helpful
5
Replies
CreatePlease to create content