Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Cat 66500 High CPU (BGP Issue)

I am seeing high CPU and BGP hold time expiring frequently during the day happening pretty much at the same time. I have tried using rmom, embedded event manager to investigate what proccess is ultilising high CPU with no success.

What i need to do is syslog when it happens again with process PID. Any ideas?

Tired using cisco works but dont have HUM.

Apr 8 16:56:57.386 BST: %BGP-5-ADJCHANGE: neighbor 192.168.88.3 Down BGP Notification sent

Apr 8 16:56:57.386 BST: %BGP-3-NOTIFICATION: sent to neighbor 192.168.88.3  4/0 (hold time expired) 0 bytes

8393333333333333933343333338339732239333323348833333332293989339333333

7414234524324225000140101078111539948110090096912032109981275213122060

100 * * *

90 * * * * * * ** * *** *

80 * * * * ** * ** * *** *

70 * * * * ** * ** * *** *

60 * * * * ** * ** * *** *

50 * * * * ** * *** * *** *

40 * * * ** * ** ** * *** * *** * *

30 **********************************************************************

20 **********************************************************************

10 **********************************************************************

0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.

0 5 0 5 0 5 0 5 0 5 0 5 0

1 REPLY
Hall of Fame Super Silver

Re: Cat 66500 High CPU (BGP Issue)

Hello Francisco,

check if the IOS supports EEM (and what version of EEM),  this is the kind of things that can be done with it

Joe Clark that writes in network management is the reference for EEM

http://www.cisco.com/en/US/products/ps6815/products_ios_protocol_group_home.html

with a tool like this the network device takes part in proactive monitoring

Hope to help

Giuseppe

382
Views
0
Helpful
1
Replies
CreatePlease to create content