I have single 6509 chassis with single power supply and a sup1A.The sup running with cat os hybrid. I have blank pc card .I need to copy the cat os to the pc card.Note here that i have no line modules to tftp the image to pc card. Is there any command in the SP mode (console> (enable))to use to copy the cat os to the pc card (slot0:)
I tried copy flash slot0: gives error
but dir slot0: gives the output.
Please let me know how can i copy the image ?
Also one more question that IF i want to edit the SP rommon to change the boot variable like BOOT=slot0:cat6000-sup.6-3-3.bin.from BOOT=bootflash: Will the switch work?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.