Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CAT to native IOS upgradation

Hi,

We have 6509 Catalyst switch with MSFC card(SUP 32). Both are having different OS. One is running on CAT OS while MSFC is running on IOS. We want to upgrade CAT OS to native. Can someone help me on this. We have upgraded DRAM to 512 MB for this upgradation.

Thanks in Advance.

Rajesh

1 ACCEPTED SOLUTION

Accepted Solutions

Re: CAT to native IOS upgradation

Rajesh,

Here is the document for converting Cat OS to IOS

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml#conv_720

Hope that helps

Regards,

~JG

2 REPLIES

Re: CAT to native IOS upgradation

Rajesh,

Here is the document for converting Cat OS to IOS

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml#conv_720

Hope that helps

Regards,

~JG

Re: CAT to native IOS upgradation

Rajesh, I've done this long time ago in lab using Sup2/MSFC2s so I cannot speak for sup32s but the process is very much the same.

read this document creafully before attempting the convertion.. hope others can comment on this for any other assistance or tips.

conversion process from hybrid to native..

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml#intro

Cisco EDI CatOS to IOS Configuration Conversion Tool -

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a0080816fbc.shtml

HTH

Jorge

127
Views
0
Helpful
2
Replies
CreatePlease to create content