Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cat3560 - QoS output

Hi,

Can anyone explain then following output.

I have searched the command reference and configuration guide but they do not explain the five coloums showing packets. Are these tansmits, drops, queues.

Thanks

Anthony

sh mls qos interface f0/13 statistics

FastEthernet0/13

dscp: incoming

-------------------------------

0 - 4 : 43485 0 0 0 0

5 - 9 : 0 0 0 0 0

10 - 14 : 0 0 0 0 0

15 - 19 : 0 0 0 0 0

20 - 24 : 0 0 0 0 0

25 - 29 : 0 3085236 0 0 0

30 - 34 : 0 0 0 0 0

35 - 39 : 0 0 0 0 0

40 - 44 : 0 0 0 0 0

45 - 49 : 0 247128241 0 409093 0

50 - 54 : 0 0 0 0 0

55 - 59 : 0 0 0 0 0

60 - 64 : 0 0 0 0

dscp: outgoing

-------------------------------

0 - 4 : 950962 0 0 0 0

5 - 9 : 0 0 0 46 0

10 - 14 : 0 0 0 0 0

15 - 19 : 0 0 0 0 0

20 - 24 : 0 0 0 0 4204

25 - 29 : 0 8 0 0 0

30 - 34 : 0 0 0 0 0

35 - 39 : 0 0 0 0 0

40 - 44 : 0 0 0 0 0

45 - 49 : 0 186178077 0 4382751 0

50 - 54 : 0 0 0 0 0

55 - 59 : 0 0 0 0 0

60 - 64 : 0 0 0 0

cos: incoming

-------------------------------

0 - 4 : 250697280 0 0 0 0

5 - 7 : 0 0 0

cos: outgoing

-------------------------------

0 - 4 : 968289 46 0 4212 0

5 - 7 : 186178077 3998563 384188

Policer: Inprofile: 0 OutofProfile: 0

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Cat3560 - QoS output

Hello.

The numbers indicate the incoming or outgoing marked packets. So for example, the row below shows how many packets have been seen for DSCP values 0, 1, 2, 3 and 4. In the case below, 43485 packets have been seen incoming with a DSCP value of 0

0 - 4 : 43485 0 0 0 0

In the example below 186178077 packets have been see inbound with the DSCP of 46 marked.

45 - 49 : 0 186178077 0 4382751 0

Simon

2 REPLIES

Re: Cat3560 - QoS output

Hello.

The numbers indicate the incoming or outgoing marked packets. So for example, the row below shows how many packets have been seen for DSCP values 0, 1, 2, 3 and 4. In the case below, 43485 packets have been seen incoming with a DSCP value of 0

0 - 4 : 43485 0 0 0 0

In the example below 186178077 packets have been see inbound with the DSCP of 46 marked.

45 - 49 : 0 186178077 0 4382751 0

Simon

New Member

Re: Cat3560 - QoS output

Hi Simon

Thanks for the reply.

Yes now I can see it, the 0-4 represent the coloums.

0 1 2 3 4

4382751 packets have been marked with dscp 48 etc..

Anthony

134
Views
0
Helpful
2
Replies