cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
753
Views
0
Helpful
1
Replies

cat4506-e upgrade ios from rommon

pamirian76
Level 1
Level 1

hi guys,

I need to upgrade the ios on my sup iv because it doesn't recognize my 4506-e chassis.

the problem I'm having is I'm going into rommon and this is what "set" command returns.

PS1=rommon ! >

RommonVer=12.2(20r)EW1

BSI=0

EnableAutoConfig=1

CV=bootflash:

RANDOM_NUM=1160313299

ConsecPostPassedCnt=2

RET_2_RTS=12:49:42 UTC Tue Jun 10 2008

RET_2_RCALTS=1213102182

IpAddr=192.168.1.10

Netmask=255.255.255.0

Broadcast=192.168.1.255

BootedFileName=bootflash:

ConfigReg=0x2101

now I setup my laptop to 192.168.1.3/24 and connect it to the mgt port of the sup.

I just can't ping the mgt port form my laptop and I can't ping the laptop from the mgt port.

windows firewall is disables on my laptop.

basically I need to boot from tftp the new version of ios and then from there do a copy tftp flash.

I've been banging my head agaist a wall to understand WHY i can't ping. it's very simple networking and I can't make this work.

any help would be greately appreciated!!

so basically since I can't ping, tftp doesn't work. for some reason there is no connectivity between my laptop and the mgt port of the sup.

on my laptop if I do (arp -a) it shows me the mgmt port ip and mac so ... something works...

thanks.

1 Reply 1
Review Cisco Networking products for a $25 gift card