Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat4506 high cpu usage

Hi,

 

We are getting high CPU utilisation in our core switches core1 & 2,

 

We have checked and found the high CPU for Cat4k Mgmt LoPri,

 

Also find attached files regarding same.

 

Rgds

Akil

 

 

 

 

 

 

 

3 REPLIES
Bronze

Cat4506 high cpu usage

Hi,

You can find valuable information related to the problem in the following article:

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml

Best regards,

Giorgos

New Member

Cat4506 high cpu usage

Hi Akil,

I'd suggest you to first fix the Hostflapping issue that you are seeing on both the switches. Under 'show log', you'd see the following error message:

%C4K_EBM-4-HOSTFLAPPING

00:00:00:00:FE:00 seems to be flapping between Fa4//48 and Po1.

00:00:00:00:FE:01 seems to be flapping between Fa4/1 and Po1.

So, figure out what these mac address belong to and why is it flapping between interfaces.

Once this is fixed, check if you still see high cpu utilization.

Cheers,

Rajiv

New Member

Re: Cat4506 high cpu usage

Hi Rajeev,

Thanks for updating this.

Also find attached outputs show version and show platform health

please suggest us after checking these outputs

Regds

Akil

281
Views
0
Helpful
3
Replies
CreatePlease login to create content