05-29-2007 09:32 AM - edited 03-05-2019 04:21 PM
Hi,
Does anyone knows the pin out assigment for creating a console cable using CAT5 RJ-45.
Is it the same as a Crossover?
Thanks
Jorge
05-29-2007 10:01 AM
Hi,
Here you are a simple link to show you how, its not a crossover:
http://www.kame.net/~suz/cisco-cable.html
http://www.cisco.com/warp/public/701/14.html
HTH, please do rate all helpful replies using the scroll box on the right,
Mohammed Mahmoud.
05-29-2007 10:03 AM
05-29-2007 10:03 AM
Hi Jorge,
I believe this link will help you with your requirement
http://www.delmar.edu/Courses/ITNW1325/cisco1labs.htm
You can have a look at the last pin out diagram which is for roll over cable.
HTH
Ankur
*Pls rate all helpfull post
05-29-2007 10:05 AM
No it is not the same as a crossover, a rollover cable would be laid out like this:
End 1
Orange/White, Orange, Green/White, Blue, Blue/White, Green, Brown/White, Brown
End 2 is the inverse of End 1
Brown, Brown/White, Green, Blue/White, Blue,
Green/White, Orange, Orange/White
So however you wire one end you just do the opposite on the other. Very Simple.
05-29-2007 10:17 AM
Thank you all for your reply and information.
Just made one and it worked ..
Rgds
Jorge
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: