WS-C5000 Software, Version McpSW: 4.5(4) NmpSW: 4.5(4)
I am using above switch with below configuration.
1 2 100BaseFX MM Supervis WS-X5506 007397148 ok
2 24 10/100BaseTX Ethernet WS-X5224 007407779 ok
3 12 10/100BaseTX Ethernet WS-X5213A 006497822 ok
I have turned STP off on vlan 1(default) and connected uplink from root switch. Which work for vlan 1 (port 1/1 and 2/1-12) ports? I put UNIX box and works well with vlan1.
I have created another vlan and turned off STP. I have moved 1/1 and 2/1-12 ports to this new vlan. I moved my uplink to this new vlan and found no connectivity and I lost my uplink to my root switch. If I move this to vlan 1, it starts working. I don?t understand why it happening. Am I missing something when I created new vlan?
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...