Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat6500 console speed

Does anyone know how to change the console port speed on a 6500?

Getting this error message...

Failed to change line 0's speed

2 REPLIES
Bronze

Re: Cat6500 console speed

This example shows how to set the port speed to 100 Mbps on port 2/2:

Console> (enable) set port speed 2/2 100

Port 2/2 speed set to 100 Mbps.

Console> (enable)

Hall of Fame Super Silver

Re: Cat6500 console speed

Hello Alan,

console speed can be changed by modifying the config-register (this is true on routers)

to see current config-register value use sh ver in a telnet session if the value is different then 0x2102, or 0x102 change it with

conf t

config-register 0x2102

end

copy running-config startup-config

reload

I've found a reference to this other way:

line con 0

speed

However, I would do it on a telnet session not while using the console port.

Hope to help

Giuseppe

222
Views
0
Helpful
2
Replies
CreatePlease login to create content