Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat6509 IOS 12.2SXF doesn't support IP SLA

Hi Sir,

I have a Catalyst 6509-E with Supervisor Engine 32. Its IOS software is as follows:

Major Rel : 12.2SXF

Rel : 12.2(18)SXF6

Platform : CAT6000-SUP32/MSFC2A

Feat. Set : ENTERPRISE SERVICES SSH

Image filename : s3223-entservicesk9_wan-mz.122-18.SXF6.bin

From Feature Navigator, the feature "IP SLAs - ICMP Echo Operation" is supported. But in actual fact, the command is not available, as follows:

Cat6509#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Cat6509(config)#ip sl?

slb

Please advise.

Thank you.

B.Rgds,

Lim TS

5 REPLIES
New Member

Re: Cat6509 IOS 12.2SXF doesn't support IP SLA

ip sla monitor is not supported in 12.2.

You can use the command "rtr responder" instead.

New Member

Re: Cat6509 IOS 12.2SXF doesn't support IP SLA

Hi,

I'd like to use IP SLAs ICMP Echo Operation to track an object and attach it to a static route, as follows:

!

ip sla monitor 1

type echo protocol ipIcmpEcho 150.50.1.1

ip sla monitor schedule 1 life forever start-time now

!

track 1 rtr 1 reachability

!

ip route 20.20.20.0 255.255.255.0 192.168.10.2 track 1

!

Since the command is not available on 12.2SXF, I guess the closest workaround is as follows:

!

rtr 1

type echo protocol ipIcmpEcho 150.50.1.1

rtr schedule 1 start-time now life forever

!

Cat6509(config)#track 1 ?

interface Select an interface to track

Unfortunately, I can't complete the configuration because the next command "track 1 rtr 1 reachability" is not available. Do you have further suggestion?

I just wonder why the output of Feature Navigator indicates that IP SLAs is supported in 12.2SXF but in actual fact is not. The tool seems to be wrong.

Thank you.

B.Rgds,

Lim TS

New Member

Re: Cat6509 IOS 12.2SXF doesn't support IP SLA

Ok..this is what I see under command looksup for "rtr responder". Looks like you need to upgrade to 12.2(31)SB2

Command History

Release Modification

12.0(3)T

This command was introduced.

12.3(14)T

This command was replaced by the ip sla monitor responder command.

12.2(33)SRA

This command was integrated into Cisco IOS Release 12.2(33)SRA.

12.2(31)SB2

This command was replaced by the ip sla monitor responder command.

Silver

Re: Cat6509 IOS 12.2SXF doesn't support IP SLA

If you want to run 7600 code on your 6500, you can upgrade to something in the 12.2(33)SRA train.

If you prefer to get an actual 6500 release that supports this, wait 1 month for 12.2(33)SXH to come out. It will support this feature.

New Member

Re: Cat6509 IOS 12.2SXF doesn't support IP SLA

1539
Views
0
Helpful
5
Replies