Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

cat6807 + VS-S2T-10G + CVR-X2-SFP10G + SFP-H10GB-CU5M?

Is the Cisco OneXConverter Module, CVR-X2-SFP10G, compatible with VS-S2T-10G in a 6807 using a SFP-H10GB-CU5M cable to connect to an ASA5585?

Description of the CVR-X2-SFP10G, which states it is compatible with the SFP-H10GB-CU5M:

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-547521.html

Compatibility matrix which eludes the CVR-X2-SFP10G module is compatible with the VS-S2T-10G and SFP-H10GB-CU5M but only if the SFP-H10GB-CU5M is version 2.  I am not comfortable with this chart as it does not list the software requirement which could imply it is not compatible when used with the SFP-H10GB-CU5M.

http://www.cisco.com/en/US/partner/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.html

snippit of chart:

Platform

Switch or Module

Transceiver Model

Minimum Software Release Required

VS-S2T-10G
VS-S2T-10G-XL
WS-X6816-10G-2T
WS-X6816-10G-2TXL
WS-X6908-10G-2T
WS-X6908-10G-2TXL

(With CVR-X2-SFP10G converter for X2 ports)

SFP-H10GB-CU1M1
SFP-H10GB-CU3M1
SFP-H10GB-CU5M1

SFP-10G-SR
SFP-10G-LRM
SFP-10G-LR

12.2(50)SY

12.2(50)SY

1 Only Version -02 or later is supported.

Everyone's tags (1)
1 REPLY
Cisco Employee

cat6807 + VS-S2T-10G + CVR-X2-SFP10G + SFP-H10GB-CU5M?

Hello teater,

SFP-H10GB-CU5M1 is supported with Sup2T and CVR-X2-SFP10G starting 12.2(50)SY.

I will look into fixing the compatibility matrix to fill this missing cell.

Thanks,

~Amer

735
Views
0
Helpful
1
Replies
CreatePlease to create content