Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Catalyst 2950 failed to reboot

Hi Sir/Madam,

Today I did a reboot for 1 of my Catalyst Switch 2950, But after reboot, I get nothing from console, And the SYST LED is amber, Does that mean there is a hardware issue in my switch? Thanks

4 REPLIES

Re: Catalyst 2950 failed to reboot

New Member

Re: Catalyst 2950 failed to reboot

The LED option is "System LED is amber, and all port LEDs are off", It seems to be a corrupted software, Right, But I got nothing from Console,

How can I fix it? Thanks

New Member

Re: Catalyst 2950 failed to reboot

Hello,

I have the same Problem with one 2950 switch, it seems working for 10 weeks.

But whene update the software and reboot it, the switch crash with system led flashing and stat led green, and the console gives nothings..

note : fan and power are woking

Any solution ???

Thanks.

Purple

Re: Catalyst 2950 failed to reboot

If you can't get anything out of the console to troubleshoot this further then your only option is going to be to get it RMA'd. I would try different speeds on your terminal emulator first to see if you can get any output from the console otherwise your options are limited.

352
Views
0
Helpful
4
Replies