Wondering if anyone has seen this behavior on this switch and if a resolution is available: Switch loses connectivity on 10/100 ethernet ports. Power is on but, all ports go black. This switches provides connectivity to Cisco Aironet 1200 Access Points. No other ethernet devices are connected to the 10/100 ethernet ports.
The 10/100 ports are normally flashing green. When I get a call the from the floor that they are unable to connect to access points the switch ports are no longer flashing green but, all lights are out. There is power and I can telnet to the switch. IOS VERSION: Version 12.1(13)EA1a. I've reloaded remotely but not cycled powered.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...