Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Catalyst 3560

I am trying to use the remote PS for the Catalyst 3560.  I have not been able to locate the harness to make this connection.  Is the harness normally provided with the switch or purchased seperate.  I need to purchase if not provided.  Could you send me a link to purchase harness.  The manual says it is 120VAC and 12VDC capable.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Catalyst 3560

Hi Steve,

Are you referring to Cisco Redundant Power supply for 3560, to provide redundant power to the switch? If yes, you need CAB-RPS2300= to connect the 3560 switch to it. Please see the datasheet below :

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps7148/ps7130/product_data_sheet0900aecd805bbef6.html

HTH,

-amit singh

1 REPLY
Cisco Employee

Re: Catalyst 3560

Hi Steve,

Are you referring to Cisco Redundant Power supply for 3560, to provide redundant power to the switch? If yes, you need CAB-RPS2300= to connect the 3560 switch to it. Please see the datasheet below :

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps7148/ps7130/product_data_sheet0900aecd805bbef6.html

HTH,

-amit singh

191
Views
0
Helpful
1
Replies
CreatePlease to create content