Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Catalyst 3560

I have a 3560 series switch and was wondering about powering the unit 12VDC.  I will be mounting this in a solar site for canopy wireless internet.  I do not have a inverter for AC power at this time.  I would like to keep this site DC.  The male portion of the wiring harness is directly mounted to the unit.  The unit specifies DC inputs for remote PS.  I have looked into the redundant PS 2300 used in different applications.  I wanted to get a wiring harness and pin out for the 12 DC supply to the switch.  Is this a option?

Everyone's tags (1)
1 REPLY
New Member

Re: Catalyst 3560

Yes that seems to be an option!!

DC Input Voltages
(RPS Input)

•  +12V at 5A (Cisco Catalyst 3560-24TS and Catalyst 3560-48TS); 7.5A  (Cisco Catalyst 3560-24PS and Catalyst 3560-48PS); 10.5A (Cisco Catalyst  3560G-24TS); 17.5A (Cisco Catalyst 3560G-48TS); 14A (Cisco Catalyst  3560G-24PS and Catalyst 3560G-48PS)
• -48V at 7.8A (PoE switches)

Please refer this for the same:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5528/product_data_sheet09186a00801f3d7d.html

HTH

Rahul

480
Views
0
Helpful
1
Replies