Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Catalyst 3560X-24P-S Switch image

Hello ,

We have got new

Catalyst 3560X-24P-S Switch which is going to be used as L3 switch with basic static routes configrtaion ( no EIGRP or OSPF )

Was confused between two licenses below,  which I see on cisco site , can any one please suggest me which one I should pick up

1)c3560e-ipbasek9-mz.150-2.SE4.bin

2)c3560e-universalk9-mz.150-2.SE4.bin

Regards

Amit

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: Catalyst 3560X-24P-S Switch image

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Depends on what's the switch is licensed for now (show license).

If its licensed for IPBase, either will work.

If its licensed for IPServices, you'll want the universal license.

The only "advantage" of the IPBase image, it's physically smaller than the universal image.

PS:

For just static routing, you only need the IPBase license.

3 REPLIES
Super Bronze

Re: Catalyst 3560X-24P-S Switch image

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Depends on what's the switch is licensed for now (show license).

If its licensed for IPBase, either will work.

If its licensed for IPServices, you'll want the universal license.

The only "advantage" of the IPBase image, it's physically smaller than the universal image.

PS:

For just static routing, you only need the IPBase license.

New Member

Catalyst 3560X-24P-S Switch image

thanks for help

Green

Catalyst 3560X-24P-S Switch image

Amit,

Please see this extract from link:-

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/15.0_2_se/release/notes/OL25302.html#wp754685

Deciding Which Files to Use

If you have a service support contract and order a software license or if you order a switch, you receive the universal software image and a specific software license. If you do not have a service support contract, such as a SMARTnet contract, download the IP base image from Cisco.com. For Catalyst 3750-X and 3560-X switches, this image has the IP base and LAN base feature sets. For Catalyst 3750-E and 3560-E switches, this image has the IP base feature set.

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
155
Views
0
Helpful
3
Replies
CreatePlease to create content