I've a stack with 3 Catalyst WS-C3750G-24TS-S1U with IP Base software image.
Now I need to use PBR and so I need to upgrade to IP Service image.
I need to buy an upgrade for each member of the stack? Or I can buy just an upgrade for all the stack?
Then... just for confirm: the rule that I need to use is very simple, I have a routing table with some routes on 192.168.xx and 10.xxx and a default gateway at 192.168.2.110 that we use for internet browsing.
I would like that some hosts use another default gateway instead, and then I've thinked to set a policy like this:
ip access-list extended to201
deny ip any 192.168.0.0 0.0.255.255deny ip any 10.0.0.0 0.255.255.255permit ip 192.168.2.0 0.0.0.255 anydeny ip any any
route-map switchugw permit 10
match ip address to201
set ip next-hop 192.168.2.201
Interface Vlan 2
ip policy route-map switchugw
There is a way to do this with the feature of the ipbase?
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...