I need to stack two Cisco 3850 switches...they are on different IOS....one is 03.02.02.SE and the other is 03.02.03.SE.....as you know for stack to work they need to be the same....so my question is has upgrading the IOS on these switches changed from the previous ways, and what is Digitally Signed? and how does this impact the IOS-XE that comes on the new switches now?...also need a link to upgrade procedures....Thanks
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...