Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Catalyst 3850 query

Hi,

Does this version supports wireless?

Switch Ports Model              SW Version        SW Image              Mode

------ ----- -----              ----------        ----------            ----

     1 56    WS-C3850-48P       03.02.03.SE       cat3k_caa-universalk9 INSTALL

 

Also on sh ver, it displayed

System image file is "flash:packages.conf"

How would you know the .bin file used?  How can you check on the switch?

TIA

PF

 

 

 

 

 

5 REPLIES
Silver

Hi, In order to check the

Hi,

 

In order to check the .bin you issue the show flash command, that version should support wireless, see the link below with the release notes:

 

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/release_notes/OL_30562_01.html

 

Hope this helps.

Leo

Hall of Fame Super Gold

Does this version supports

Does this version supports wireless?

What do you mean by this?  As a controller?  As a switch to directly connect AP?  Both?

New Member

Leo,Thanks for your reply. 

Leo,

Thanks for your reply.  Sorry, what I meant was configure the switch as a wireless mobility controller.

Thanks.

 

PF

Hall of Fame Super Gold

For MC/MA, you need IP Base.

For MC/MA, you need IP Base.  But you also need your 3850 to have AP licenses as well and your AP has to be directly connected to the appliance.

New Member

Thanks Leo. PF

Thanks Leo.

 

PF

40
Views
0
Helpful
5
Replies
CreatePlease to create content