Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Catalyst 4006 Cat OS to IOS

Hello:

Just wondering if this is even possible. The chassis in question has a WS-X4013 sup in it, 64MB of DRAM and 16MB of flash. Any more detail needed, please let me know. TIA for any guidance.

Brad Olson

3 REPLIES
Purple

Re: Catalyst 4006 Cat OS to IOS

The quick answer is no you cannot upgrade that to IOS , catos only. You need a Sup IIplus to have IOS and that comes with it from the factory.

Cisco Employee

Re: Catalyst 4006 Cat OS to IOS

Hi Brad,

This facility is not available for cat4k switches like you have on Cat6k switches. Cat4k sups will either run CATOS or will run IOS.

So sup 1 and sup 2 will only run and support CATOS and sup 2+,3,4,5 will only run IOS.

HTH

Ankur

*Pls rate all helpfull post

New Member

Re: Catalyst 4006 Cat OS to IOS

Thanks all. The search function wasn't working for me at the time of my post. I found exxactly what you both are saying. Thank you, much appreciated.

473
Views
10
Helpful
3
Replies