Catalyst 4503 with supervisor II WS-X4013+TS II PLUS
Hi everybody, I have 2 Catalysts 4503 with supervisor II WS-X4013+TS II PLUS which have 12 ports 10/100/1000 and 8 ports SFP, Iim not able to bring up that ports two 10/100/1000 are configured in trunk to 2 catalyst 2950 and two SFp are configured with port channel in trunk to the other 4503.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...