11-16-2006 04:23 AM - edited 03-05-2019 12:51 PM
Is it possible to install a 2nd redundant supervisor (ws-x4515) into a Catalyst 4506 chassis
Thanks
-Paul
11-16-2006 04:31 AM
Hi Paul,
It's not possible to achieve SUP redundancy in 4506.
In 4500 series swicthes, only catalyst 4507R and 4510R supports SUP redundancy.
hope it helps .. let me know if u have any questions and pls do rate post.
11-16-2006 04:36 AM
Hi Paul,
4506 doesnot support Sup redundancy. It has only one sup slot and 5 payload slots for Modules.
Only 4507R and 4510R support Sup redundancy. These switches have dedicated sup slots and you cannot use a module in the sup slot.
http://www.cisco.com/en/US/products/hw/switches/ps4324/products_data_sheet0900aecd801792b1.html
HTH,
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide