Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

catalyst 4507R-E module WS-X4648-RJ45V+E problem

Hi Community, I have a catalyst 4507R-E and I put this module WS-X4648-RJ45V+E in the 7 slot, but the show module command show me Unsupported, this is the show version and the show module!

? This catalyst 4507R-E whit this Supervisor Supervisor II+ WS-X4013+ suppourt thos module WS-X4648-RJ45V+E ?

thanks Community.

Sw_Core_AECSA#sh version

Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASE-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2011 by Cisco Systems, Inc.

Compiled Thu 27-Jan-11 11:43 by prod_rel_team

Image text-base: 0x10000000, data-base: 0x11ED6EBC

ROM: 12.2(31r)SGA1

Dagobah Revision 226, Swamp Revision 34

Sw_Core_AECSA uptime is 4 hours, 15 minutes

Uptime for this control processor is 4 hours, 15 minutes

System returned to ROM by power-on

System image file is "bootflash:cat4500-ipbase-mz.122-54.SG1.bin"

cisco WS-C4507R-E (MPC8245) processor (revision 10) with 262144K bytes of memory.

Processor board ID FOppp

PC8245 CPU at 266Mhz, Supervisor II+

Last reset from PowerUp

1 Virtual Ethernet interface

8 Gigabit Ethernet interfaces

511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

Mod Ports Card Type                              Model              Serial No.

---+-----+--------------------------------------+------------------+-----------

1     6  SFP, 10/100/1000BaseT (RJ45)V, Cisco/I WS-X4506-GB-T      JA12345

3     2  Supervisor II+ 1000BaseX (GBIC)        WS-X4013+          J12345

7     0  Unsupported module                     WS-X4648-RJ45V+E   J12345

  • LAN Switching and Routing
Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: catalyst 4507R-E module WS-X4648-RJ45V+E problem

This catalyst 4507R-E whit this Supervisor Supervisor II+ WS-X4013+ suppourt thos module WS-X4648-RJ45V+E ?

No, your supervisor only supports classic linecards but the WS-4648-RJ45V+E is not a classic line card so it is not supported. Have a look at this link and refer to Table 1 which shows which supervisors you could use with this card -

http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea.html

Jon

2 REPLIES
Hall of Fame Super Blue

Re: catalyst 4507R-E module WS-X4648-RJ45V+E problem

This catalyst 4507R-E whit this Supervisor Supervisor II+ WS-X4013+ suppourt thos module WS-X4648-RJ45V+E ?

No, your supervisor only supports classic linecards but the WS-4648-RJ45V+E is not a classic line card so it is not supported. Have a look at this link and refer to Table 1 which shows which supervisors you could use with this card -

http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea.html

Jon

New Member

catalyst 4507R-E module WS-X4648-RJ45V+E problem

Thanks, Jon!

444
Views
0
Helpful
2
Replies
This widget could not be displayed.