Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Catalyst 4510 with Sup v-10GE (model WS-x4516-10GE) Issues!!!

My supervisor blades have 2 10GE ports and 4 GE ports on them. I have 2 supervisor blades on my 4510. I was wondering if I can use all 8 (4 on 1st blade and 4 on the 2nd blade) at the same time. I do not plan on using the 10GE ports.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Catalyst 4510 with Sup v-10GE (model WS-x4516-10GE) Issues!!

Unfortunately I don't believe that will work. You will only be able to use 2 1G SFP's per supervisors giving you a total of four.

When two Supervisor Engine V-10GEs are present in a Catalyst 4510R or Catalyst 4507R switch, two SFP uplinks are active on both the primary (active) and secondary (standby) supervisor engines by default, or four uplinks will be active in a nonredundant configuration.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/configuration/notes/78_16727.html#wp112187

HTH,

Mark

6 REPLIES

Re: Catalyst 4510 with Sup v-10GE (model WS-x4516-10GE) Issues!!

Unfortunately I don't believe that will work. You will only be able to use 2 1G SFP's per supervisors giving you a total of four.

When two Supervisor Engine V-10GEs are present in a Catalyst 4510R or Catalyst 4507R switch, two SFP uplinks are active on both the primary (active) and secondary (standby) supervisor engines by default, or four uplinks will be active in a nonredundant configuration.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/configuration/notes/78_16727.html#wp112187

HTH,

Mark

Community Member

Re: Catalyst 4510 with Sup v-10GE (model WS-x4516-10GE) Issues!!

So, I would need to add an SFP blade (such as a WS-X4506-GB-T)in order to get more GIG interfaces? Correct?

Re: Catalyst 4510 with Sup v-10GE (model WS-x4516-10GE) Issues!!

Brian,

That is correct. You would need an additional blade to satisfy your requirement.

HTH,

Mark

Community Member

Re: Catalyst 4510 with Sup v-10GE (model WS-x4516-10GE) Issues!!

Thanks Mark!!!

Community Member

Re: Catalyst 4510 with Sup v-10GE (model WS-x4516-10GE) Issues!!

Are these blades Hot Swappable too???

Re: Catalyst 4510 with Sup v-10GE (model WS-x4516-10GE) Issues!!

Yes, They are hot swappable.

366
Views
0
Helpful
6
Replies
CreatePlease to create content