Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Catalyst 5500 Switch Upgrade Issue

I have a Cisco 5500 Switch with sup module, 1000BaseX Supervisor IIIG (WS-X5550). I'm having issue upgrading this switch, when I try to upgrade it tells me unable to do so. I was thinking it's related to the supervisor module.

Thanks,

1 REPLY
Purple

Re: Catalyst 5500 Switch Upgrade Issue

Should not be a problem , make sure you are using the correct image , the 3G takes it own special image . Also make sure the rommon is up to date for the image you are trying to use . And last you need enough space in bootflash to download the image . Squeeze bootflash to create enough room , if not enough room then you would need to delete the running image and squeeze the space and download the correct image then change your boot statement . What is the message that you get specifically ?

121
Views
0
Helpful
1
Replies