Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Catalyst 6000 config

Could you tell me if this config can work please:

-Catalyst 6506 enhanced 6-slot shassis 12U

-Catalyst 6500 Super.Engi-2,2GE+MSFC2/PFC-2

-Catalyst 6500 48-ports Gig-E Mod:(req.SFP)

Think you for your help.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: Catalyst 6000 config

Yes

5 REPLIES
Hall of Fame Super Blue

Re: Catalyst 6000 config

Could you provide part number of 48 port module ie.

WS-X6???

If the module is a WS-X67xx module part number then you cannot use this with a supervisor 2, you will need a sup 720.

Jon

New Member

Re: Catalyst 6000 config

Ok it's the WS-X6748.

Which sup. engine should i used

Hall of Fame Super Blue

Re: Catalyst 6000 config

If you want to use the WS-X6748-GE-TX then you have to have a Sup720 ie. you cannot use a Sup1a, sup2 or a sup32.

Jon

New Member

Re: Catalyst 6000 config

I can i use the WS-X6748-SFP on the Sup 720 ?

Hall of Fame Super Blue

Re: Catalyst 6000 config

Yes

152
Views
0
Helpful
5
Replies
CreatePlease to create content