Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Catalyst 6000 Supervisor Engine 2 ROMMON Upgrade

Hi,

I am unable to upgrade the ROMMON to release 7.1(1).

When I entered the upgrade rom-monitor command, instead of running the upgrade process it just copying the .srec file from tftp server.

Please kindly advice.

4 REPLIES
Cisco Employee

Re: Catalyst 6000 Supervisor Engine 2 ROMMON Upgrade

Hello Friend,

As per the output attached you are on RP. Try the following and paste the output:

Router# remote command switch show version

The above should work and give you the output from SP.If you face any issues, try

Router# remote login switch

and then do the show version.

Check the boot rom strap version there.

HTH,

-amit singh

New Member

Re: Catalyst 6000 Supervisor Engine 2 ROMMON Upgrade

Attached is the details for [remote command switch show version]

Cisco Employee

Re: Catalyst 6000 Supervisor Engine 2 ROMMON Upgrade

Also, did you try reloading or resetting the sup engine after rommon upgrade?

-amit singh

New Member

Re: Catalyst 6000 Supervisor Engine 2 ROMMON Upgrade

Yes. I did

183
Views
0
Helpful
4
Replies