In CatOS, the config file is always and automatically saved in NVRAM. You dont have to do a " wr mem" in case to save the configruation changes to NVRAM, it automatically gets saved in NVRAM. Whenever switch reboots it picks up the file from NVRAM.
If you want switch to always get config from NVRAM, makre sure that yoyur config-register is not set to 0x2142 at all. With the 0x2142, switch ignores the NVRAM config and boots as a raw switch.Generally it is set to 0x2102.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.