Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Catalyst 6509-E Supervisor Engine Upgrade

Hi All,

I'm plan to do supervisor engine upgrade from WS-SUP720-3B to VS-S2T-10G. Currently we have two 6509-E (redundant) and also have two Sup Engine. Can i know the best practise to do the upgrade?

Is it I need to power down the 6509-E and take the old Sup and install new Sup?

Any support document?

 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

First, you need to power down

First, you need to power down your chassis.  You can't hot-swap your new Sup2T.  

 

Next, review your line cards.  ALL OF THEM.  Make sure your DFC/PFC cards are compatible with Sup2T.

1 REPLY
Hall of Fame Super Gold

First, you need to power down

First, you need to power down your chassis.  You can't hot-swap your new Sup2T.  

 

Next, review your line cards.  ALL OF THEM.  Make sure your DFC/PFC cards are compatible with Sup2T.

53
Views
0
Helpful
1
Replies
CreatePlease to create content