Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Catalyst 6509E with a redundant supervisors, all ten uplinks active

On the Catalyst VSSE 720 supervisor data sheet I found that this supervisor: "Allows two 10 Gigabit Ethernet and two Gigabit Ethernet uplinks to be active simultaneously; with redundant supervisors, allows all ten uplinks to be active"

Can anyone help me to configure this feature?

Thanks a lot.

Roberto

Everyone's tags (4)
3 REPLIES
VIP Super Bronze

Re: Catalyst 6509E with a redundant supervisors, all ten uplinks

Few questions

Are you running VSS?

With one sup in each switch or two?

Are you using port channel?

Sent from Cisco Technical Support iPhone App

New Member

Re: Catalyst 6509E with a redundant supervisors, all ten uplinks

I would like to configure the redundancy also using port channel features.

I've a Catalyst 6509E with a redundant 720 supervisor, and two Catalyst 4506E with a single supervisor card.

It's possible to connect both Cat 4509 10GE (total 4 interface) to Cat6509 10GE using redundant supervisor 10GE interface?

VIP Super Bronze

Catalyst 6509E with a redundant supervisors, all ten uplinks act

No, since the 2 4509 chassis can not be combined (VSS) (at this time), it is not possible.  You can certainly build a Portchannel using all 4 10GE on the 6500 and connect them to only one 4509, but not to both 4509s.

HTH

540
Views
0
Helpful
3
Replies