Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Catalyst express setup question

Hello,

I have a new Catalyst poe switch, and I used the express setup feature.

However, I noticed it didn't give me an option to enter a telnet user name.

Is there a way I can setup a user name?

4 REPLIES
Bronze

Re: Catalyst express setup question

If you are talking about a Catalyst Express 500, there is no telnet access to those devices. GUI is the only option.

Q. Are there plans to add a CLI or Telnet to Cisco Catalyst Express 500 Series Switches?

A. No, there are no plans to add a CLI or Telnet to these switches.

Documented under:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6545/prod_qas0900aecd80322b09.html

Community Member

Re: Catalyst express setup question

It's for the 3560G.

Should I be able to specific a login and a password through telnet.

Community Member

Re: Catalyst express setup question

There is no username used, to set password:

From priviledged exec type: config t

line vty 0 4

password yourpassword

login

Replace yourpassword with the password you want to use

Community Member

Re: Catalyst express setup question

Carl,

There is no CLI with the switch he referred to in the OP.

173
Views
0
Helpful
4
Replies
CreatePlease to create content