Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Catalyst IOS Native Release and NAC

We are currently reviewing the network infrastructure here with a view to implement NAC-2.

In tandem, we'd like to upgrade the core Sup's to 720 cards but I notice that 802.1X support is scheduled for a "future" release of IOS.

We currently happily run 802.1X on an isolated WLAN running on firewalled Cat3560 switches.

I realise I want my cake and eat it here, but ideally I'd like to transition the core to native IOS but also maintain/provide 802.1X support.

Any firmer dates other than "future".

I don't want to have to upgrade to a later version of CatOS and then IOS. I'd like to do it all in one fell swoop so that it only hurts once :)

Thanks

  • LAN Switching and Routing
1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Catalyst IOS Native Release and NAC

802.1x is supported in 12.2SX release on the sup720 :

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/dot1x.htm

2 REPLIES
Silver

Re: Catalyst IOS Native Release and NAC

802.1x is supported in 12.2SX release on the sup720 :

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/dot1x.htm

Re: Catalyst IOS Native Release and NAC

Hi friend,

Please find the documnet for the supported switchs and the minimum IOS release required for the NAC feature support.

http://www.cisco.com/en/US/products/ps6128/products_device_support_table09186a008075fff6.html

HTH, please rate if it does.

-amit singh

129
Views
0
Helpful
2
Replies
This widget could not be displayed.