I am in the market for a used, under $100 GbE switch and I came across a Catalyst WS-C2948G switch. On the bottom left of the front panel it says 10/100/1000 ETHERNET and the person selling it insists that all 48 ports are 10/100/1000. My issue is with lack of documentation, whenever I try to search for that specific model, I always get the different versions such as L3, TX etc. I am looking to find out if these switches are indeed 48-port GbE.
I don't have experience with Cisco equipment that old. I looked at the pictures closely and couldn't find a more specific model number. My best guess is, it only says it in the OS. I've searched the internet for pictures of the GE-TX and it appears identical. I've also tried to find pictures of the other 2948G models to verify those said only "10/100 ETHERNET" in the left corner, but could not find any.
I believe the user ports were 10/100 with 2 gbic gig uplinks. I can tell you it was not 48 ports of gig interfaces . These came out before gig became prevalent . Also be aware these are not IOS switches they ran Catos so you would have to know how to configure catos . If you question it have the seller send you the screen shot of a "show port " command and you will see the ports are 10/100 .
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.