Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CatOS Config Register? 0x10F or 0x2102

Guys,

Am I correct in saying the following for CatOS:

0x10F does the following

Switch to boot image from specified file. - If specified file is not there? does it just go into rommon mode?

Baud = 9600

Ignore config = disabled?

and

0x2102 does the following

uses the first file in flash? = what part of flash ?? If no file in flash? then use boot env?

Baud = 9600

Ignore config = disabled?

Could someone just clarify these points for me :

0x10f

If specified file is not there? does it just go into rommon mode?

0x2102

uses the first file in flash? = what part of flash ??

Many thx indeed, and Merry Christmas to all.

Ken

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: CatOS Config Register? 0x10F or 0x2102

With CatOS, it's recommended that you enter a word option:rommon | bootflash | system

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/6.x/configuration/guide/boot.html#wp1020006

This URL is also useful on understating IOS values:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml

5 REPLIES
Hall of Fame Super Bronze

Re: CatOS Config Register? 0x10F or 0x2102

New Member

Re: CatOS Config Register? 0x10F or 0x2102

thx for that.

Just gonna sit down and work it out. its been such a long time :))))

Many thx

Ken

New Member

Re: CatOS Config Register? 0x10F or 0x2102

also, can I just confirm that CatOS is exactly the same as IOS for config-reg settings?

Thx

Ken

Hall of Fame Super Bronze

Re: CatOS Config Register? 0x10F or 0x2102

With CatOS, it's recommended that you enter a word option:rommon | bootflash | system

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/6.x/configuration/guide/boot.html#wp1020006

This URL is also useful on understating IOS values:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml

New Member

Re: CatOS Config Register? 0x10F or 0x2102

thx man. really good links :)

Thx for the help :)

Ken

4813
Views
0
Helpful
5
Replies