Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CatOS convert to IOS Catalyst 4506 with Sup 2

Hi NetPro,

Currently, my access switch using 4506 n Sup2, running on CatOS . so, would it be possibled to convert to IOS ?

here with the hardware spec.

WS-C4506 Software, Version NmpSW: 8.4(7)GLX

Copyright (c) 1995-2005 by Cisco Systems, Inc.

NMP S/W compiled on May 9 2005, 18:26:07

GSP S/W compiled on May 09 2005, 17:31:33

System Bootstrap Version: 5.4(1)

Hardware Version: 5.0 Model: WS-C4506 Serial #: FOX06481MCT

Mod Port Model Serial # Versions

--- ---- ------------------ -------------------- ---------------------------------

1 2 WS-X4013 JAE06460452 Hw : 5.0

Gsp: 8.4(7.0)

Nmp: 8.4(7)GLX

4 48 WS-X4148-RJ JAE063807GC Hw : 3.1

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 65536K 40206K 25330K 16384K 10214K 6170K 480K 317K 163K

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X4013 no ok

4 4 48 10/100BaseTx Ethernet WS-X4148-RJ no ok

Mod Module-Name Serial-Num

--- -------------------- --------------------

1 JAE06460452

4 JAE063807GC

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-0b-5f-ec-34-00 to 00-0b-5f-ec-34-3f 5.0 5.4(1) 8.4(7)GLX

4 00-0a-f4-54-65-90 to 00-0a-f4-54-65-bf 3.1

your reply will be highly appreciated.

thanks.

regards,

Jack

2 REPLIES
Bronze

Re: CatOS convert to IOS Catalyst 4506 with Sup 2

Nope, the Sup II is CatOS only. Your only option is to upgrade to a Sup II+ (or greater of course) You should double check that all your line cards are supported before you do.

New Member

Re: CatOS convert to IOS Catalyst 4506 with Sup 2

Hi,

thanks for your information.

regards,

Jack

329
Views
4
Helpful
2
Replies