Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.


catos password change via snmp

Anyone know how to change a catos device password , telnet or enablepass via snmp if you know the community strings. Have been unable to find anything on the website and don't want to have to go thru the manual recovery process. Any webpages I can look at ?


Re: catos password change via snmp

Basically you can only do the following :

-Download the router config using SNMP

-Change the password on the config file

-Upload the new router config to the router from the tftp server

-Copy the changes to NVRAM

To download / upload the router config :

To save the changes to NVRAM:

Snmpset -c rw-string #.#.#.# . integer 1


the rw-string is the router read-write snmp community string AND #.#.#.# the ip address


Re: catos password change via snmp

This appears to be for a IOS box .The issue is with catos boxes running 7.X version software. Seems strange there isn't a way to change things via snmp like the passwords .


Re: catos password change via snmp

May have found a solution. I found a box that I know the passwords are correct and copied and pasted the "set password and set enablepass lines with the password strings into a file with beginning and end statements for a unix file and then you can config net the file with just the 2 statements and that will change the password without having to know the old password.