Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CATOS QoS

When operating in hybrid mode all qos is configured in catos. We are using an ethernet WAN service and need to pass voice over the WAN, however the catos desn't support traffic shaping on ethernet ports, only policing. I should be able to use an aggregate policer to ensure the link bandwidth is not completely consumed by non voice traffic, this is how I'm thinking of reserving bandidth on the ethernet link for voice traffic. If you have any thoughts about this I would appreciate your feedback.

1 REPLY
Silver

Re: CATOS QoS

Here is a link to some good references for applying QOS in hybrid mode.

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801c8c4b.shtml#catos

142
Views
0
Helpful
1
Replies