Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Catos to Ios convertion in Catalyst6500 witch Sup2/Msfc2

Hello,

I`m converting 2 Cat6506 with Sup2/MSFC2 from CatOS to IOS. The Sup2/MSFC2 has only DRAM:128MB and ONBOARD FLASH:32MB. Please I need locate the way to upgrade the DRAM from 128MB to 256MB or better to 512MB.

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Catos to Ios convertion in Catalyst6500 witch Sup2/Msfc2

Hi Luis,

Have a look at this link which will help you in upgrading DRAM

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_6953.htm

If you also want to upgrade the DRAM for sup engine then this link will help you

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_12693.htm

HTH

Ankur

*Pls rate all helpfull post

2 REPLIES
Cisco Employee

Re: Catos to Ios convertion in Catalyst6500 witch Sup2/Msfc2

Hi Luis,

Have a look at this link which will help you in upgrading DRAM

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_6953.htm

If you also want to upgrade the DRAM for sup engine then this link will help you

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_12693.htm

HTH

Ankur

*Pls rate all helpfull post

Community Member

Re: Catos to Ios convertion in Catalyst6500 witch Sup2/Msfc2

Hi Ankur,

Thanks a lot for your info. It was very useful to solve my problem.

Thanks again

132
Views
0
Helpful
2
Replies
CreatePlease to create content