Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CBWFQ on catalyst 6500

Need some guidance.

I have a cat6509 running native IOS version s72033-ipservicesk9_wan-mz.122-18.SXF6.bin.

We have WS-X6748-GE-TX in mod 4 and interface 4/42 has been configured as a routed interface with bandwidth 34Mb with other end is also a Cat 6500.

We run both data and voice over this interface.

The question is can I configure CBWFQ on this int gig 4/42 to prioritize voice and have multiple classes for the data.

Currently we are running CAR with policing the data traffic to 28Mb.

Thanks in advance

1 REPLY
Anonymous
N/A

Re: CBWFQ on catalyst 6500

The PFC2 supports only ingress PFC QoS, which includes ingress policing. The PFC3 supports both ingress and egress PFC QoS, which includes ingress and egress policing."

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/qos.html

866
Views
0
Helpful
1
Replies