I'm looking for a solution to implement a CBWFQ QoS on, and I need to implement it on an egress 4Gbps bundled Giga-Ethernet in one port-channel
But I can't find a suitable platform or router that support such feature, any advise to choose a one ??
I had my research, and I had found a good platform for us, and it's Cisco ISR 3945 with an enhanced either-switch module (SM-D-ES3G-48-P), but I'm not sure that the SM-D Etherswitch would support such a feature, does anyone have the answer if it can support such a scenario?
the policy will be as the following:
class-map match-any MATCH_DSCP_512XK match dscp 50 class-map match-any MATCH_DSCP_1XM match dscp 51 class-map match-any MATCH_DSCP_2XM match dscp 49 class-map match-any MATCH_DSCP_4XM match dscp 48 class-map match-any MATCH_DSCP_8XM match dscp 63 class-map match-any MATCH_DSCP_1SM match dscp 55 class-map match-any MATCH_DSCP_2SM match dscp 54 class-map match-any MATCH_DSCP_4SM match dscp 53 class-map match-any MATCH_DSCP_8SM match dscp 52
policy-map CBWFQ_ADSL class MATCH_DSCP_512XK bandwidth percent 10 class MATCH_DSCP_1XM bandwidth percent 10 class MATCH_DSCP_2XM bandwidth percent 12 class MATCH_DSCP_4XM bandwidth percent 15 class MATCH_DSCP_8XM bandwidth percent 10
class MATCH_DSCP_1SM bandwidth percent 4 class MATCH_DSCP_2SM bandwidth percent 6 class MATCH_DSCP_4SM bandwidth percent 8 class MATCH_DSCP_8SM bandwidth percent 7
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.