Hi all
got a tricky for me here
i have some public ip's from BT one for my router and another for my DVR for the cameras at works. our old shitty BT home hub used a DMZ for the cameras so we could access them from our phones etc. now i upgraded us to a 1941 adsl joby. and everything is fine except i cant get the cameras to work.
is this some thing in the access list i'm missing??
as you will see from the config i'm still only learning so its quite messy im sure, but please have a look and let me know your views.
Ethnet-HQ(config-if)#do sh run
Building configuration...
Current configuration : 2353 bytes
!
! Last configuration change at 18:43:00 gmt Wed Nov 20 2013
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Ethnet-HQ
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$..OH$obVwN..K3Jf8blsgWTHps0
!
no aaa new-model
clock timezone gmt 0
dot11 syslog
ip source-route
!
!
ip dhcp excluded-address 192.168.0.1 192.168.0.100
ip dhcp excluded-address 192.168.1.1 192.168.1.100
!
ip dhcp pool Ethnet-LAN
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 194.72.0.114 62.6.40.178
!
ip dhcp pool LAN-NO-VPN
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1 255.255.255.0
dns-server 8.8.8.8
lease infinite
!
!
ip cef
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
!
vpdn enable
!
vpdn-group pppoe
!
!
!
!
!
license udi pid CISCO1841 sn FCZ122372H9
!
!
!
!
!
!
interface FastEthernet0/0
description Ethnet LAN
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
duplex auto
speed auto
!
interface FastEthernet0/1
description Ethnet LAN no VPN
ip address 192.168.1.1 255.255.255.0
duplex auto
speed auto
!
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
pvc 0/38
pppoe-client dial-pool-number 1
!
!
interface ATM0/1/0
no ip address
shutdown
no atm ilmi-keepalive
!
interface Dialer1
mtu 1458
ip address 217.#.96.137 255.255.255.248
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
ppp chap hostname ##########
ppp chap password 0 #########
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
ip nat pool BT-Statics 217.#.96.137 217.#.96.141 netmask 255.255.255.248
ip nat inside source list 1 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
!
access-list 1 permit 192.168.0.1
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 1 permit 217.#.96.136 0.0.0.7
!
!
!
control-plane
!
banner motd ^C###########
!
line con 0
password 7 020E055759565F2E5C43
logging synchronous
login
line aux 0
password 7 1101180945425B031427
login
line vty 0 4
exec-timeout 0 0
password 7 060E0E2D1E1E5916151A
login
transport input all
!
scheduler allocate 20000 1000
end
thanks for taking the time to look and i currently dont use fa0/1 and the VPN config doesnt work (altho would be nice if it did )
