Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CDP: Disable

Is it possible to disable cdp under an SVI on a Catalyst 6500 switch. tried running the command but still no sucess. CDP is globally enabled.

interface vlan 100

no cdp run

4 REPLIES
Bronze

Re: CDP: Disable

I have not tried it but isn't the command to disable cdp under an interface:

no cdp en

regards,

Purple

Re: CDP: Disable

CDP is not a layer 3 function so you would have to disable it on the port interfaces.

Hall of Fame Super Gold

Re: CDP: Disable

The "no cdp run" is for Global configuration only (turns off CDP to the appliance).

You can over-ride this command by going into the interface and do the "no cdp enable".

For example.

config t

no cdp run < -- Turns OFF CDP to the appliance.

!

interface FastEthernet 2/12

cdp enable < --- Enable CDP to this AND ONLY this interface.

Does this help?

Bronze

Re: CDP: Disable

Hi Leo,

exactly my point in my posting earlier that he ought to use no cdp en under the interface.

regards,

252
Views
0
Helpful
4
Replies
CreatePlease to create content