Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ce 500 switch raoming issue for wireless clients

Hi

i am working at a site with 4 1230 aironet access points & 1 ce 500 switch , there is no encryption / no authentication configured , all the devices are in the same vlan , the client devices are able to get the dhcp addresses & they get registered with the access points but as soon as the client device roams from one ap to another the netwotk connetivity is lost , a cisco documentation states to get the smartports configured as switches but that doesnt work at the same time bcos we have no encryption / authentication configured WDS doesnt come into picture , when i replace this ce 500 with a 2950 evrything seems to be perfect , please help because i have to deploy this network using a ce 500.

1 REPLY
New Member

Re: ce 500 switch raoming issue for wireless clients

Hi

The problem has been taken care of by configuring the smartports as others & getting arp inspection disabled

112
Views
0
Helpful
1
Replies