05-04-2014 11:32 AM - edited 03-07-2019 07:19 PM
Hi everybody
I hope you guys are doing great. I miss this forum a lot, currently I am focused on SP area because of my job which keeps me busy .
Anyway, I have a question; please consider the following example:
R1# show ip route
O 4.4.4.4 [110/31] via 16.16.16.6, 00:00:05, FastEthernet0/1
[110/31] via 15.15.15.5, 00:00:05, FastEthernet0/0
R1#show ip cef 4.4.4.4 internal
4.4.4.4/32, version 33, epoch 0, per-destination sharing
0 packets, 0 bytes
tag information set
local tag: tunnel-head
via 16.16.16.6, FastEthernet0/1, 0 dependencies
traffic share 1
next hop 16.16.16.6, FastEthernet0/1
valid adjacency
via 15.15.15.5, FastEthernet0/0, 0 dependencies
traffic share 1
next hop 15.15.15.5, FastEthernet0/0
valid adjacency
output omitted!!
++++++++++++++++++++++++++++++
Above we see traffic share is 1, how can we configure traffic share 2 for FastEthernet0/1 ?
I tried manipulating bandwidth under f0/1 but the it seems to have no effect.
I appreciate your help
Have a great weekend.
Solved! Go to Solution.
05-04-2014 01:27 PM
Since you use ospf traffic share will be always (except possibly when combined with MPLS TE) 1.
05-04-2014 01:27 PM
Since you use ospf traffic share will be always (except possibly when combined with MPLS TE) 1.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: