Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

cGVRP and cisco 7609

Hi,

I'm trying to setup cGVRP on 7609 (IOS Version 12.2(33)SRD3)

All looks fine, but according to statistics switch doesn't send any GVRP messages. ;(

All needed output below:

sh gvrp summary

GVRP global state           : enabled

GVRP VLAN creation          : enabled

VLANs created via GVRP      : none

MAC learning auto provision : enabled

Learning disabled on VLANs  : none

==============
sh run int gi 1/35
Building configuration...
Current configuration : 137 bytes
!
interface GigabitEthernet1/35
description kalin29k5-sw1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
end
===============
sh gvrp interface gigabitEthernet 1/35
Port      Status    Mode            Registrar State
Gi1/35    on        fast compact    normal
Port      Transmit Timeout   Leave Timeout   Leaveall Timeout
Gi1/35    200                600             10000
Port      Vlans Declared
Gi1/35    1-11,13-15,17,21-23,25,30-35,500-501,505-506,1000-1001,2001-2049,2052-2147,3000-3004,4000,4094
Port      Vlans Registered
Gi1/35    none
Port      Vlans Registered and in Spanning Tree Forwarding State
Gi1/35    none
=======================
sh gvrp interface gi 1/35 statistics
pak_rcvd                : 0
pak_leaveall_rcvd       : 0
pak_rcvd_dropped        : 0
pak_rcvd_malformed      : 0
pak_xmitted             : 0
pak_leaveall_xmitted    : 0
pak_xmit_failed         : 0
leaveall_expired        : 0
justkidding_expired     : 0
leave_expired           : 0
leave_delayed           : 0

131
Views
0
Helpful
0
Replies
CreatePlease to create content